Thursday, June 23, 2011

Several Norwex Products

I just wanted to let you know that my oven is so clean now that, not only did my smoke detector not go off but, it’s so shiny I could see my reflection! Every time I bake in the oven, I open the door to grab my grub and that darn smoke detector goes off! The bottom of my stove was very black but I was avoiding cleaning it as the oven cleaner is quite harsh and I have to evacuate my apartment and use a painter’s mask to keep from inhaling the fumes. I sprayed the stove last night with the Norwex Oven & Grill Cleaner and let it sit for a few hours. Then I used the Spririnette to scrub the oven and also used the Kitchen Scrub Cloth. Pretty much everything came off and I was able to rinse the scrub cloth completely clear of the black so it’s back to blue. I think that oven cleaner, Spirinette & Scrub cloth are worth their weight in gold. I baked some Spanakopita last night and had Connor ready with a dish towel standing underneath the smoke detector ready to fan the air when it went off but this was the first time it didn’t. Now that I have a clean oven, this shouldn’t be happening anymore. Now I don’t need to worry about inhaling those toxic fumes. Same goes for the enviro-cloth. I cleaned my bathrooms and kitchen in no time. The cleaning paste in the shower was great. Had to use a tooth brush because the grout between the tiles is quite porous but they came clean as well. It made cleaning my house fast. Thought you may want to have my testimonial for future parties. L.H.

Please Note: Below are the instructions for using Norwex Oven and Grill Cleaner. You will see that it says to spray on a warm surface and you only need to leave it on for 5 to 10 minutes. I just wanted to clarify this in case you are reading the above and are not familiar with the product and think it needs to be left on for hours. It does not though some people have had success using it on non-preheated surfaces and leaving it on for longer periods.


1. Preheat oven to 100°F (38°C) and turn off before applying product.


Pre-heating the surface will energize the microbes and enzymes to work faster.


Be careful not to over heat the oven as the water based cleaner will simply evaporate on contact if you do.


2. Apply undiluted Oven and Grill Cleaner to top of oven first, then to the sides, and lastly to the bottom avoiding heating element(s).


3. Allow cleaner to work for 5-10 minutes.


If you've let it sit too long and it's dried, simply use a spray bottle with water and mist the surface again - it will make wiping up the mess much easier.


4. Wipe with damp Enviro Cloth and rinse thoroughly with potable water.


Stubborn deposits may require more than one application and a scrub with a Spirisponge, Spirinett or Kitchen Scrub Cloth.


5. After cleaning, heat oven to 200°F (95°C) for 10 minutes prior to use.

No comments:

Post a Comment